Introducción

Having trouble with your headphones or USB ports? The Input/output board may be the source of your problem. Here is a quick an easy guide to replace your IO board, and get your devices working again!

  1. Remove the eleven 3mm Phillips #1 screws.
    • Remove the eleven 3mm Phillips #1 screws.

  2. Use a plastic opening tool to gently remove the back panel.
    • Use a plastic opening tool to gently remove the back panel.

    • It can be easier to pry open near a corner.

    • Use your fingers to remove the connecting cable to the battery unit. Firmly grab the cord closest to the motherboard connection and pull straight back.

    • Remove the four 2mm screws on the sides of the battery.

    • To remove the battery, lift up on one side to get your fingers underneath and lift away.

    • Remove the single 2mm screw securing the IO board to the laptop.

    • Pull up on the connector to release the IO board cable from the motherboard.

    • It may be easier to pull from the blue tab.

    • Remove the IO board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Damon

Miembro Desde 01/11/18

181 Reputación

2 Guías creadas

Equipo

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 12

Todo El Tiempo: 68