Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the #J0 screwdriver to unscrew the seven 4mm screws located around the back panel.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to gently pry around the four sides of the back panel until the panel is fully released.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.