Repara tus cosas Comunidad Tienda

Dell Adamo XPS Palm Rest Disassembly

Introducción

We will be removing the Palm Rest panel from the computer which will allow us to access the internals of the computer.

Qué necesitas

  1. Aviso: los pasos 1-2 provienen de una guía que está marcada como "En progreso".

    • Turn off the laptop before doing anything to the laptop.

    • Then turn the laptop around on its back.

    Traducir

    • On the back of the computer there is a latch that you have to slide and hold in order to remove the battery.

    • Then you have to push the computer battery towards the computer and rotate upwards.

    • Finally lift the battery out of the computer.

    Traducir

    • Turn the computer around and remove the eighteen screws on the base cover.

    • The screws that secure the base cover are of different sizes. Note the location and size of the screws as you remove them so that you can replace them correctly

    Traducir

    • You aren't actually taking apart the display but only opening it up to gain access to the palm rest panel and keyboard.

    Traducir

    • Use your fingers to ease the palm rest assembly from the computer.

    • Pull on the plastic tab on top of the cables to avoid damaging the connectors.

    • Exercise extreme care while lifting the palm rest assembly to avoid damaging the function key cable.

    Traducir

    • Lift the palm rest assembly to access the function key cable.

    • To prevent damage to the function key cable, do not disconnect the function key cable from the palm rest.

    Traducir

    • Disconnect the function key cable from the connector on the system board.

    Traducir

    • Lift the connector latch that secures the touch pad cable to the touch pad connector and remove the cable.

    • To prevent damage to the display hinges, ensure that you do not adjust the angle between the display and the computer base after removing the palm rest assembly.

    Traducir

    • Lift the palm rest assembly off the computer base.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Christopher Melo-Pelaez

Miembro Desde 10/27/17

1,921 Reputación

9 Guías creadas

Insignias: 15

+ 12 más insignias

Equipo

RampUP America, Inc. Miembro de RampUP America, Inc.

Community

42 Miembros

1,985 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 153