Repara tus cosas Comunidad Tienda

Dell 1908FPc Monitor USB Hard drive Replacement

Introducción

In this guide you will find instructions on how to replace the USB motherboard of a Dell 1908FPc monitor.

Qué necesitas

  1. Dell 1908FPc Monitor USB Hard drive Replacement, USB Motherboard: paso 1, imagen 1 de 3 Dell 1908FPc Monitor USB Hard drive Replacement, USB Motherboard: paso 1, imagen 2 de 3 Dell 1908FPc Monitor USB Hard drive Replacement, USB Motherboard: paso 1, imagen 3 de 3

    • Pop the front bezel off by inserting fingers underneath the left or right inside edge of screen.

    • Do not try to remove the bezel completely as there is a ribbon cable attached to the bottom for the buttons located in the bottom right hand corner.

    • A lot of pressure is required to remove the bezel. Do not be afraid of asserting some force.

    Editar

  2. Dell 1908FPc Monitor USB Hard drive Replacement: paso 2, imagen 1 de 2 Dell 1908FPc Monitor USB Hard drive Replacement: paso 2, imagen 2 de 2

    • Turn the monitor over. Unscrew the four 4mm x 10mm screws on the back of the monitor and remove the plastic backing.

    Editar

  4. Dell 1908FPc Monitor USB Hard drive Replacement: paso 3, imagen 1 de 2 Dell 1908FPc Monitor USB Hard drive Replacement: paso 3, imagen 2 de 2

    • Unscrew the 3mm x 4mm screw that retains the side USB shield.

    • Remove shield and set aside.

    Editar

  5. Dell 1908FPc Monitor USB Hard drive Replacement: paso 4, imagen 1 de 3 Dell 1908FPc Monitor USB Hard drive Replacement: paso 4, imagen 2 de 3 Dell 1908FPc Monitor USB Hard drive Replacement: paso 4, imagen 3 de 3

    • Remove the five 3mm x 2mm screws that retain the metal cover protecting the electronics.

    • Remove the four 2.75mm x 6.75mm studs by the video imput ports.

    • Slide the cover downwards to unlock and remove cover.

    Editar

  6. Dell 1908FPc Monitor USB Hard drive Replacement: paso 5, imagen 1 de 2 Dell 1908FPc Monitor USB Hard drive Replacement: paso 5, imagen 2 de 2

    • Unplug board connections.

    • Uncsrew the four 3mm x 5.5mm screws that hold the USB motherboard down.

    • Get new board ready to install.

    Editar
Conclusión

You now know how to replace the USB motherboard on a Dell 1908FPc monitor.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Connor Henshaw

Miembro Desde 10/02/17

128 Reputación

1 Guía escrita

Insignias: 3

Equipo

Michigan Tech, Team S3-G9, Galliah Fall 2017 Miembro de Michigan Tech, Team S3-G9, Galliah Fall 2017

MTU-GALLIAH-F17S3G9

1 Miembro

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 548