DeWalt DW936 Black Cap Replacement

Introducción

This guide will show you how to replace the black air filter cap located on the top of the motor.

Using a T-20 hex head screw, unscrew the two screws located at the top and bottom of the black air filter. The screws are directly above and below the yellow lettering.

Use your hands to pull the black air filter away from the body of the saw to detach.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Miembro Desde 01/25/17

603 Reputación

5 Guías creadas

CPSU-BANGHART-W17S8G2

3 Miembros

5 Guías creadas