Repara tus cosas Comunidad Tienda

DeWalt DCS380 shoe and boot removal

Introducción

Disassembly of shoe and boot for later repair of gearbox or blade release lever.

Qué necesitas

  1. DeWalt DCS380 shoe and boot removal, Removing shoe and boot.: paso 1, imagen 1 de 1

    • Remove the battery before disassembly.

    • Remove the shoe by pressing the yellow button on the left side of the hand grip.

    Editar

  3. DeWalt DCS380 shoe and boot removal: paso 2, imagen 1 de 2 DeWalt DCS380 shoe and boot removal: paso 2, imagen 2 de 2

    • Remove the two M8x18mm T20 bolts from the front plate.

    Editar

  4. DeWalt DCS380 shoe and boot removal: paso 3, imagen 1 de 1

    • Pull the front of the grip while holding the saw body in place.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 14

Todo El Tiempo: 640