Saltar al contenido principal

DeWalt DCF885 Selector Switch Replacement

Qué necesitas

  1. DeWalt DCF885 Selector Switch Replacement, Battery: paso 1, imagen 1 de 1
    • Press the battery release button at the top of the battery.

  2. DeWalt DCF885 Selector Switch Replacement: paso 2, imagen 1 de 1
    • Pull the battery away from the tool.

  3. DeWalt DCF885 Selector Switch Replacement, Motor Assembly: paso 3, imagen 1 de 1
    • Remove the eight 18 mm Torx Security #10 screws.

  4. DeWalt DCF885 Selector Switch Replacement: paso 4, imagen 1 de 1
    • Separate the two halves of the outer case. Set the empty side down and out of the way.

  5. DeWalt DCF885 Selector Switch Replacement: paso 5, imagen 1 de 1
    • Disconnect the connector from the motor assembly.

  6. DeWalt DCF885 Selector Switch Replacement: paso 6, imagen 1 de 1
    • Pull the motor away from the brush assembly.

  7. DeWalt DCF885 Selector Switch Replacement, Brush Assembly: paso 7, imagen 1 de 1
    • Lift the brush assembly out of the drill case.

  8. DeWalt DCF885 Selector Switch Replacement: paso 8, imagen 1 de 1
    • Pull the armature assembly apart from the brush ring assembly.

  9. DeWalt DCF885 Selector Switch Replacement: paso 9, imagen 1 de 1
    • Pry the two circled connectors apart from the brush ring assembly.

  10. DeWalt DCF885 Selector Switch Replacement: paso 10, imagen 1 de 1
    • The brush assembly is now removed from the drill body.

  11. DeWalt DCF885 Selector Switch Replacement, Switch Assembly: paso 11, imagen 1 de 1
    • Pull the switch assembly up and out of the drill case.

  12. DeWalt DCF885 Selector Switch Replacement, Selector Switch: paso 12, imagen 1 de 1
    • Pull the selector switch out from the outer case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 17

Todo El Tiempo: 670