Repara tus cosas Comunidad Tienda

DeWALT Hammer Drill DW511 Chuck Replacement

Qué necesitas

  1. DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: paso 1, imagen 1 de 3 DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: paso 1, imagen 2 de 3 DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: paso 1, imagen 3 de 3

    • Remove two 45 mm T20 Torx screws.

    • Remove one 30 mm T20 Torx screw.

    Traducir

  2. DeWALT Hammer Drill DW511 Chuck Replacement: paso 2, imagen 1 de 1

    • Pull off the top case and set it aside.

    Traducir

  4. DeWALT Hammer Drill DW511 Chuck Replacement: paso 3, imagen 1 de 3 DeWALT Hammer Drill DW511 Chuck Replacement: paso 3, imagen 2 de 3 DeWALT Hammer Drill DW511 Chuck Replacement: paso 3, imagen 3 de 3

    • Grab the gear case cover and gently pull it out just enough to where it exposes the lever assembly.

    • It is important that the brushes are removed before you do this step or you may damage your brushes.

    • The lever assembly can now be lifted out.

    Traducir

  5. DeWALT Hammer Drill DW511 Chuck Replacement: paso 4, imagen 1 de 1

    • With the old lever assembly removed you can now replace it with a new one.

    Traducir

  6. DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: paso 5, imagen 1 de 3 DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: paso 5, imagen 2 de 3 DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: paso 5, imagen 3 de 3

    • Gently separate the chuck and plastic housing from the hammer drill body.

    • The removal of the screw from the chuck to separate the plastic housing requires hand strength and specialized tools.

    • The plastic housing is prone to damage if excessive force is applied during the replacement.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 605