Saltar al contenido principal
  1. Use a JIS #00 screwdriver to remove the four 3/32" screws that attach the base-plate to the speaker enclosure. Use a magnetic mat to prevent the loss of screws.
    • Use a JIS #00 screwdriver to remove the four 3/32" screws that attach the base-plate to the speaker enclosure.

    • Use a magnetic mat to prevent the loss of screws.

  2. Use a JIS #1 screwdriver to remove the six 3/32" screws marked with a red circle. Remove the two 1/16" screws marked with orange circles using a JIS #000 screwdriver.
    • Use a JIS #1 screwdriver to remove the six 3/32" screws marked with a red circle.

    • Remove the two 1/16" screws marked with orange circles using a JIS #000 screwdriver.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Remove the six  3/32"  screws marked with red circles using a JIS #00 screwdriver.
    • Remove the six 3/32" screws marked with red circles using a JIS #00 screwdriver.

    • Remove the larger 3/32" screw indicated by an orange circle using a JIS #1 screwdriver.

    • Once the screws are removed, gently lift the top (where the touch controls are) off of the speaker.

  5. De-solder the connections from the battery to the circuit board.
    • De-solder the connections from the battery to the circuit board.

    • If you do not already have a replacement battery, you can purchase one here.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 16

Últimos 30 Días: 69

Todo El Tiempo: 476