Repara tus cosas Comunidad Tienda

DJI Phantom Propeller Replacement

Introducción

Use this guide to replace a broken propellor on your DJI Phantom. When replacing, be sure to match the original propellor spin direction.

Qué necesitas

  1. DJI Phantom Propeller Replacement, Open the Battery Compartment: paso 1, imagen 1 de 3 DJI Phantom Propeller Replacement, Open the Battery Compartment: paso 1, imagen 2 de 3 DJI Phantom Propeller Replacement, Open the Battery Compartment: paso 1, imagen 3 de 3

    • Press down on battery door release tab to flip the battery door open.

    Editar

  2. DJI Phantom Propeller Replacement, Remove the Battery: paso 2, imagen 1 de 3 DJI Phantom Propeller Replacement, Remove the Battery: paso 2, imagen 2 de 3 DJI Phantom Propeller Replacement, Remove the Battery: paso 2, imagen 3 de 3

    • Pull out the battery pack.

    • Avoid pulling on the battery wires, excess stress may break the wires, damage the power connectors, or crack the internal solder joints.

    Editar

  3. DJI Phantom Propeller Replacement, Disconnect the Battery: paso 3, imagen 1 de 2 DJI Phantom Propeller Replacement, Disconnect the Battery: paso 3, imagen 2 de 2

    • Pull the two halves of the XT60 power connector apart.

    • It's a tight fit, so be careful not to hit your drone or yank on the cables when it releases!

    Editar

  5. DJI Phantom Propeller Replacement, Identifying Silver and Black Collets: paso 4, imagen 1 de 2 DJI Phantom Propeller Replacement, Identifying Silver and Black Collets: paso 4, imagen 2 de 2

    • Silver-topped propeller collets unscrew counter-clockwise

    • Black-topped propeller collets unscrew clockwise

    Editar

  6. DJI Phantom Propeller Replacement, Unscrewing Silver Collets: paso 5, imagen 1 de 3 DJI Phantom Propeller Replacement, Unscrewing Silver Collets: paso 5, imagen 2 de 3 DJI Phantom Propeller Replacement, Unscrewing Silver Collets: paso 5, imagen 3 de 3

    • For propellors with silver collets: Use a 12 mm wrench or socket to loosen silver collets in the counter-clockwise direction.

    • Once free, unscrew and remove the collet.

    Editar

  7. DJI Phantom Propeller Replacement, Unscrewing Black Collets: paso 6, imagen 1 de 3 DJI Phantom Propeller Replacement, Unscrewing Black Collets: paso 6, imagen 2 de 3 DJI Phantom Propeller Replacement, Unscrewing Black Collets: paso 6, imagen 3 de 3

    • For propellors with black collets: Use a 12 mm wrench or socket to loosen black collets in the clockwise direction.

    • Once free, unscrew and remove the collet.

    Editar

  8. DJI Phantom Propeller Replacement, Remove the Propeller: paso 7, imagen 1 de 3 DJI Phantom Propeller Replacement, Remove the Propeller: paso 7, imagen 2 de 3 DJI Phantom Propeller Replacement, Remove the Propeller: paso 7, imagen 3 de 3

    • Gently press down the motor shaft and lift the propeller up to remove it.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

David Hoyt

Miembro Desde 04/09/10

4,023 Reputación

43 Guías creadas

Insignias: 28

+ 25 más insignias

Equipo

Cal Poly, Team 25-89, Amido Spring 2010 Miembro de Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 Miembros

63 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 9

Ultimos 30 días: 18

Todo El Tiempo: 1,267