Saltar al contenido principal

DBPOWER T20 Speaker Replacement

Qué necesitas

  1. DBPOWER T20 Speaker Replacement, DBPOWER T20 Disassembly: paso 1, imagen 1 de 1
    • Flip the device and lay flat.

  2. DBPOWER T20 Speaker Replacement: paso 2, imagen 1 de 1
    • Remove the four (9 mm) screws with a PH2 screwdriver.

    • Remove the two (7 mm) located with a PH2 screwdriver.

  3. DBPOWER T20 Speaker Replacement: paso 3, imagen 1 de 3 DBPOWER T20 Speaker Replacement: paso 3, imagen 2 de 3 DBPOWER T20 Speaker Replacement: paso 3, imagen 3 de 3
    • Flip the device over and pry the top off with a plastic opening tool.

  4. DBPOWER T20 Speaker Replacement: paso 4, imagen 1 de 1
    • Remove the ribbon cable connecting the motherboard to the button control board by gently pulling it from its connector.

  5. DBPOWER T20 Speaker Replacement: paso 5, imagen 1 de 2 DBPOWER T20 Speaker Replacement: paso 5, imagen 2 de 2
    • Remove four (6 mm) screws connecting the motherboard using a J0 screwdriver.

  6. DBPOWER T20 Speaker Replacement: paso 6, imagen 1 de 3 DBPOWER T20 Speaker Replacement: paso 6, imagen 2 de 3 DBPOWER T20 Speaker Replacement: paso 6, imagen 3 de 3
    • Remove the two cables connected to the motherboard: black power cable and the red/black fan cable.

    • the black cable requires more force to remove than the other cables.

  7. DBPOWER T20 Speaker Replacement: paso 7, imagen 1 de 2 DBPOWER T20 Speaker Replacement: paso 7, imagen 2 de 2
    • Lift the black latch on the ZIF connector and remove the ribbon cable that attaches the digitizer to the motherboard.

  8. DBPOWER T20 Speaker Replacement: paso 8, imagen 1 de 1
    • Raise motherboard by lifting sideways and then up to avoid the ports.

  9. DBPOWER T20 Speaker Replacement: paso 9, imagen 1 de 2 DBPOWER T20 Speaker Replacement: paso 9, imagen 2 de 2
    • Remove wires attaching the piezoelectric speakers to the motherboard.

  10. DBPOWER T20 Speaker Replacement: paso 10, imagen 1 de 2 DBPOWER T20 Speaker Replacement: paso 10, imagen 2 de 2
    • Remove the five screws securing the black plastic cover with a J0 screwdriver.

    • Lift up and out to remove.

  11. DBPOWER T20 Speaker Replacement, Speaker: paso 11, imagen 1 de 2 DBPOWER T20 Speaker Replacement, Speaker: paso 11, imagen 2 de 2
    • Remove the two (3 mm) screws connecting the bracket down and pull out the reflector, using a J0 Philips Head Screwdriver.

  12. DBPOWER T20 Speaker Replacement: paso 12, imagen 1 de 3 DBPOWER T20 Speaker Replacement: paso 12, imagen 2 de 3 DBPOWER T20 Speaker Replacement: paso 12, imagen 3 de 3
    • Slide the mirror straight up to remove.

  13. DBPOWER T20 Speaker Replacement: paso 13, imagen 1 de 3 DBPOWER T20 Speaker Replacement: paso 13, imagen 2 de 3 DBPOWER T20 Speaker Replacement: paso 13, imagen 3 de 3
    • Slide out the power source and disconnect its cables from the power jack and the light.

  14. DBPOWER T20 Speaker Replacement: paso 14, imagen 1 de 3 DBPOWER T20 Speaker Replacement: paso 14, imagen 2 de 3 DBPOWER T20 Speaker Replacement: paso 14, imagen 3 de 3
    • Remove the screws holding down the first speaker with a J0 screwdriver.

    • Remove the screws holding down the second speaker down.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Ryan Goldin

Miembro Desde 02/15/18

245 Reputación

1 Guía escrita

Equipo

USF Tampa, Team S16-G2, Boczar Spring 2018 Miembro de USF Tampa, Team S16-G2, Boczar Spring 2018

USFT-BOCZAR-S18S16G2

5 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 421