Saltar al contenido principal

DBPOWER T20 Disassembly

Qué necesitas

  1. DBPOWER T20 Disassembly, DBPOWER T20 Disassembly: paso 1, imagen 1 de 1
    • Flip the device and lay flat.

  2. DBPOWER T20 Disassembly: paso 2, imagen 1 de 1
    • Remove the four (9 mm) screws with a PH2 screwdriver.

    • Remove the two (7 mm) located with a PH2 screwdriver.

  3. DBPOWER T20 Disassembly: paso 3, imagen 1 de 3 DBPOWER T20 Disassembly: paso 3, imagen 2 de 3 DBPOWER T20 Disassembly: paso 3, imagen 3 de 3
    • Flip the device over and pry the top off with a plastic opening tool.

  4. DBPOWER T20 Disassembly: paso 4, imagen 1 de 1
    • Remove the ribbon cable connecting the motherboard to the button control board by gently pulling it from its connector.

  5. DBPOWER T20 Disassembly: paso 5, imagen 1 de 2 DBPOWER T20 Disassembly: paso 5, imagen 2 de 2
    • Remove four (6 mm) screws connecting the motherboard using a J0 screwdriver.

  6. DBPOWER T20 Disassembly: paso 6, imagen 1 de 3 DBPOWER T20 Disassembly: paso 6, imagen 2 de 3 DBPOWER T20 Disassembly: paso 6, imagen 3 de 3
    • Remove the two cables connected to the motherboard: black power cable and the red/black fan cable.

    • the black cable requires more force to remove than the other cables.

  7. DBPOWER T20 Disassembly: paso 7, imagen 1 de 2 DBPOWER T20 Disassembly: paso 7, imagen 2 de 2
    • Lift the black latch on the ZIF connector and remove the ribbon cable that attaches the digitizer to the motherboard.

  8. DBPOWER T20 Disassembly: paso 8, imagen 1 de 1
    • Raise motherboard by lifting sideways and then up to avoid the ports.

  9. DBPOWER T20 Disassembly: paso 9, imagen 1 de 2 DBPOWER T20 Disassembly: paso 9, imagen 2 de 2
    • Remove wires attaching the piezoelectric speakers to the motherboard.

  10. DBPOWER T20 Disassembly: paso 10, imagen 1 de 2 DBPOWER T20 Disassembly: paso 10, imagen 2 de 2
    • Remove the five screws securing the black plastic cover with a J0 screwdriver.

    • Lift up and out to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Andrea Espinosa

Miembro Desde 02/15/18

506 Reputación

3 Guías creadas

Equipo

USF Tampa, Team S16-G2, Boczar Spring 2018 Miembro de USF Tampa, Team S16-G2, Boczar Spring 2018

USFT-BOCZAR-S18S16G2

5 Miembros

5 Guías creadas

4 comentarios

Anyone find a bulb for this thing? And/or know what else (or a quick fix) would fix a dark or burn mark on the image?

jcr4130 - Contestar

haing the same issue tried to call a electronics repair place to see if the could order a new polarizing lens for me and they said they could not unless they were the ones that did the repair

derek_russell82308 -

Really? Well, crap

KweenBeeTX -

How are the lenses supposed to sit in the hompow t20 mini projector

Joseph Duffey - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 5

Ultimos 30 días: 20

Todo El Tiempo: 2,805