Repara tus cosas Comunidad Tienda

D-Link DCS-825L LED Light Cover Replacement

Introducción

Does the LED light cover have a crack on the outer cap? Is it yellowed or discolored? This guide will show you the way to replace the LED light cover for your Wi-Fi Baby Camera.

Qué necesitas

  1. D-Link DCS-825L LED Light Cover Replacement, Accent Ring: paso 1, imagen 1 de 1

    • Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.

    Traducir

  2. D-Link DCS-825L LED Light Cover Replacement: paso 2, imagen 1 de 1

    • Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.

    Traducir

  3. D-Link DCS-825L LED Light Cover Replacement: paso 3, imagen 1 de 1

    • Replace your accent ring with whichever color you choose.

    Traducir

  4. D-Link DCS-825L LED Light Cover Replacement, Back Casing: paso 4, imagen 1 de 2 D-Link DCS-825L LED Light Cover Replacement, Back Casing: paso 4, imagen 2 de 2

    • Remove one Phillips #2 screw from each side of the camera lens.

    Traducir

  6. D-Link DCS-825L LED Light Cover Replacement: paso 5, imagen 1 de 3 D-Link DCS-825L LED Light Cover Replacement: paso 5, imagen 2 de 3 D-Link DCS-825L LED Light Cover Replacement: paso 5, imagen 3 de 3

    • Pull the Wi-Fi Baby Camera open.

    • It should be easily done after the screws are removed.

    Traducir

  7. D-Link DCS-825L LED Light Cover Replacement: paso 6, imagen 1 de 2 D-Link DCS-825L LED Light Cover Replacement: paso 6, imagen 2 de 2

    • Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.

    Traducir

  8. D-Link DCS-825L LED Light Cover Replacement: paso 7, imagen 1 de 3 D-Link DCS-825L LED Light Cover Replacement: paso 7, imagen 2 de 3 D-Link DCS-825L LED Light Cover Replacement: paso 7, imagen 3 de 3

    • Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.

    Traducir

  9. D-Link DCS-825L LED Light Cover Replacement, LED Light Cover: paso 8, imagen 1 de 1

    • Grab the white cylinder with your thumb and index finger.

    Traducir

  10. D-Link DCS-825L LED Light Cover Replacement: paso 9, imagen 1 de 1

    • Gently lift the cylinder up from its placement in your Wi-Fi Baby Camera.

    Traducir

  11. D-Link DCS-825L LED Light Cover Replacement: paso 10, imagen 1 de 1

    • Remove the white cylinder completely to replace it.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Annalise Leclair

Miembro Desde 10/09/18

97 Reputación

1 Guía escrita

Insignias: 3

Equipo

USF Tampa, Team S1-G5, Leahy Fall 2018 Miembro de USF Tampa, Team S1-G5, Leahy Fall 2018

USFT-LEAHY-F18S1G5

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 291