Introducción

Did the back casing of your Wi-Fi Baby Camera crack? The answer to fixing and replacing that is in this guide.

  1. Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.
    • Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.

  2. Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.
    • Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.

  3. Replace your accent ring with whichever color you choose.
    • Replace your accent ring with whichever color you choose.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Take your Phillips Head screwdriver, with a long neck, and unscrew the two screws - one in each hole on either side of the outer exposed camera lens. Take your Phillips Head screwdriver, with a long neck, and unscrew the two screws - one in each hole on either side of the outer exposed camera lens.
    • Take your Phillips Head screwdriver, with a long neck, and unscrew the two screws - one in each hole on either side of the outer exposed camera lens.

  6. Pull the WiFi Baby Camera open. It should be easily done after the screws are removed. It should be easily done after the screws are removed.
    • Pull the WiFi Baby Camera open.

    • It should be easily done after the screws are removed.

  7. Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire. Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.
    • Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.

  8. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.
    • Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.

Conclusión

To reassemble your device, follow these instructions in reverse order.

April Ulrich

Miembro Desde 09/10/18

205 Reputación

2 Guías creadas

Equipo

USF Tampa, Team S1-G5, Leahy Fall 2018 Miembro de USF Tampa, Team S1-G5, Leahy Fall 2018

USFT-LEAHY-F18S1G5

4 Miembros

4 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 9

Todo El Tiempo: 51