Saltar al contenido principal

Partes

No se especificaron partes.

  1. Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.
    • Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.

  2. Remove the back casing to expose the circuit board.
    • Remove the back casing to expose the circuit board.

  3. Detach the gray antenna wires by gently pulling on the side closest to the circuit board.
    • Detach the gray antenna wires by gently pulling on the side closest to the circuit board.

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Detach the speaker wire by gently pulling on the side closest to the body of the camera.
    • Detach the speaker wire by gently pulling on the side closest to the body of the camera.

  6. Remove the two 7.25 mm screws  using the Ph00  head.
    • Remove the two 7.25 mm screws using the Ph00 head.

  7. Remove the back grey speaker plate
    • Remove the back grey speaker plate

  8. Remove the speaker by gently pulling on the wire near the speaker.
    • Remove the speaker by gently pulling on the wire near the speaker.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Collyn Dodge

Miembro Desde 21/03/18

305 Reputación

2 Guías creadas

Equipo

IUPUI, Team S4-G2, Baechle Spring 2018 Miembro de IUPUI, Team S4-G2, Baechle Spring 2018

IUPUI-BAECHLE-S18S4G2

3 Miembros

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 69