Saltar al contenido principal

D-Link DCS-2630L Wi-Fi Camera Microphone Replacement

Qué necesitas

  1. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement, Back casing: paso 1, imagen 1 de 1
    • Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.

  2. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 2, imagen 1 de 1
    • Remove the back casing to expose the circuit board.

  3. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 3, imagen 1 de 1
    • Detach the gray antenna wires by gently pulling on the side closest to the circuit board.

  4. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 4, imagen 1 de 1
    • Detach the speaker wire by gently pulling on the side closest to the body of the camera.

  5. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement, Microphone: paso 5, imagen 1 de 1
    • Remove the two 4.35 mm screws on the circuit board using the Philips head PH00 screw driver.

  6. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 6, imagen 1 de 2 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 6, imagen 2 de 2
    • Detach the white plug by gently pulling on the black wires.

  7. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 7, imagen 1 de 2 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 7, imagen 2 de 2
    • Remove the circuit board to expose the camera body.

    • At the same time, you will need to feed the wires through the circuit board and out the slot in the black plate under the circuit board.

  8. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 8, imagen 1 de 2 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 8, imagen 2 de 2
    • Gently pull on the grey wire to detach the microphone from the camera body.

  9. D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 9, imagen 1 de 3 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 9, imagen 2 de 3 D-Link DCS-2630L Wi-Fi Camera Microphone Replacement: paso 9, imagen 3 de 3
    • Detach the microphone from the circuit board by gently pulling on the grey wire.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

IUPUI, Team S4-G2, Baechle Spring 2018 Miembro de IUPUI, Team S4-G2, Baechle Spring 2018

IUPUI-BAECHLE-S18S4G2

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 383