Saltar al contenido principal

CygoLite Night Rover Rubber Charging Input Gasket Replacement

Qué necesitas

  1. CygoLite Night Rover Rubber Charging Input Gasket Replacement, Rubber Charging Input Gasket: paso 1, imagen 1 de 3 CygoLite Night Rover Rubber Charging Input Gasket Replacement, Rubber Charging Input Gasket: paso 1, imagen 2 de 3 CygoLite Night Rover Rubber Charging Input Gasket Replacement, Rubber Charging Input Gasket: paso 1, imagen 3 de 3
    • Place the CygoLite on a flat surface with the bottom side facing up.

    • Locate the four screws on the bottom of the device.

    • Unscrew them with a Phillips head screwdriver and remove the bottom casing.

  2. CygoLite Night Rover Rubber Charging Input Gasket Replacement: paso 2, imagen 1 de 2 CygoLite Night Rover Rubber Charging Input Gasket Replacement: paso 2, imagen 2 de 2
    • Locate the rubber gasket on the side of the device.

    • Place your new replacement rubber gasket onto the side of the casing and gently place the top of the case back on top of it.

    • Be sure to line up the grooves in the casing with the grooves on the rubber gasket.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Trent Vigar

Miembro Desde 10/22/12

101 Reputación

1 Guía escrita

Equipo

Clemson, Team 14-3, Benson Fall 2012 Miembro de Clemson, Team 14-3, Benson Fall 2012

CLEM-BENSON-F12S14G3

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 339