Repara tus cosas Comunidad Tienda

Cuisinart TOA-60FR Outside Removal

Introducción

This guide will walk you through the process of gaining access to the device. The Cuisinart toaster oven's components are all contained within the device's inner layer. To get through that, you have to remove the entire outer layer.

Qué necesitas

  1. Cuisinart TOA-60FR Outside Removal, Outside removal: paso 1, imagen 1 de 1

    • Using a 25-hexagon head, unscrew these 7.31 mm three screws.

    Editar

  2. Cuisinart TOA-60FR Outside Removal: paso 2, imagen 1 de 2 Cuisinart TOA-60FR Outside Removal: paso 2, imagen 2 de 2

    • Using a Phillips #1 screwdriver, remove all these 7.31 mm screws.

    • Pull off the back.

    Editar

  4. Cuisinart TOA-60FR Outside Removal: paso 3, imagen 1 de 3 Cuisinart TOA-60FR Outside Removal: paso 3, imagen 2 de 3 Cuisinart TOA-60FR Outside Removal: paso 3, imagen 3 de 3

    • Flip the oven upside down.

    • Pick the grey stoppers out with a sprudger.

    • Using a Phillips #1 screwdriver, remove these three 11 mm screws.

    Editar

  5. Cuisinart TOA-60FR Outside Removal: paso 4, imagen 1 de 2 Cuisinart TOA-60FR Outside Removal: paso 4, imagen 2 de 2

    • Unscrew all of the 11.05 mm screws that connect the outer shell to the device.

    Editar

  6. Cuisinart TOA-60FR Outside Removal: paso 5, imagen 1 de 3 Cuisinart TOA-60FR Outside Removal: paso 5, imagen 2 de 3 Cuisinart TOA-60FR Outside Removal: paso 5, imagen 3 de 3

    • Pull the top piece off.

    • Push down before pulling up to release the tabs.

    Editar
Conclusión

To put the device back together, follow these steps in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 8

Ultimos 30 días: 34

Todo El Tiempo: 169