Repara tus cosas Comunidad Tienda

Cuisinart Mini-Prep DLC-2A Motor Replacement

Introducción

This guide will lead you through the process of replacing a dead or dying motor in your Cuisinart Mini-Prep DLC-2A.

Qué necesitas

  1. Cuisinart Mini-Prep DLC-2A Motor Replacement, Cuisinart Mini-Prep DLC-2A Case Disassembly: paso 1, imagen 1 de 2 Cuisinart Mini-Prep DLC-2A Motor Replacement, Cuisinart Mini-Prep DLC-2A Case Disassembly: paso 1, imagen 2 de 2

    • Remove the back panel using a Phillips #1 Screwdriver on the four screws that hold it in place.

    Editar

  2. Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: paso 2, imagen 1 de 3 Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: paso 2, imagen 2 de 3 Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: paso 2, imagen 3 de 3

    • Remove the three screws that hold the motor to the top case using a Phillips #1 screwdriver.

    Editar

  4. Cuisinart Mini-Prep DLC-2A Motor Replacement: paso 3, imagen 1 de 3 Cuisinart Mini-Prep DLC-2A Motor Replacement: paso 3, imagen 2 de 3 Cuisinart Mini-Prep DLC-2A Motor Replacement: paso 3, imagen 3 de 3

    • Pull out the metal piece from the casing.

    • Pull apart the plastic casing that contains the rod.

    • Take off the plastic gears.

    Editar

  5. Cuisinart Mini-Prep DLC-2A Motor Replacement: paso 4, imagen 1 de 2 Cuisinart Mini-Prep DLC-2A Motor Replacement: paso 4, imagen 2 de 2

    • Use the Phillips #1 screwdriver to take off the screws that hold the white plastic to the metal piece.

    • Pull apart the white plastic from the metal piece.

    Editar

  6. Cuisinart Mini-Prep DLC-2A Motor Replacement: paso 5, imagen 1 de 1

    • Use an electric screwdriver with a Phillips #1 head to take off the top metal piece.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 13

Todo El Tiempo: 689