Saltar al contenido principal

Introducción

This process shows how to remove the bowl and cover assembly, which is necessary for accessing other parts of the device. These steps may be followed backwards to learn how to properly lock your assembly into place.

  1. Unplug your food processor before starting any disassembly. Remove the small pusher by rotating it clockwise and lifting up. Remove the small pusher by rotating it clockwise and lifting up.
    • Unplug your food processor before starting any disassembly.

    • Remove the small pusher by rotating it clockwise and lifting up.

  2. Remove the large pusher by grabbing its sides and pulling up.
    • Remove the large pusher by grabbing its sides and pulling up.

    • There may be a clicking sound from the safety feature being disengaged in this step.

  3. Remove the lid from the bowl by turning it clockwise and lifting. Remove the lid from the bowl by turning it clockwise and lifting. Remove the lid from the bowl by turning it clockwise and lifting.
    • Remove the lid from the bowl by turning it clockwise and lifting.

  4. Take out the blades by grabbing the plastic center piece and lifting up.
    • Take out the blades by grabbing the plastic center piece and lifting up.

    • Avoid contact with blades as they are extremely sharp.

  5. Position the handle of the bowl so that it is on your left. Grab the handle and push clockwise. Lift up the bowl to remove it. Grab the handle and push clockwise. Lift up the bowl to remove it.
    • Position the handle of the bowl so that it is on your left.

    • Grab the handle and push clockwise. Lift up the bowl to remove it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Maddie McCool

Miembro Desde 06/10/16

144 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 10-3, Livingston Fall 2016 Miembro de Cal Poly, Team 10-3, Livingston Fall 2016

CPSU-LIVINGSTON-F16S10G3

3 Miembros

7 Guías creadas

4 comentarios

All of what you say is pretty obvious, of course. My problem is that the bowl lid won’t lock onto the bowl, apparently because there’s a white plastic hook in the area of the locking mechanism. Not obvious what the purpose of that hook is, as it’s not mentioned in the manual or video. I could be wrong, but maybe that plastic hook is not supposed to be there? I’ve asked Cuisinart, and am awaiting a reply. I told them I resent having to dig for info on an appliance I’ve been using for decades. Poor design, or poor documentation, or both. Got any suggestions?

Ken - Contestar

Never mind. I found out the feeder goes in the back, not the front. Then it works.

Ken - Contestar

I bought a new bowl for my Cuisinart when the old bowl cracked. The new bowl came and fits the machine nicely, but the old lid won’t lock onto the new bowl. Is there a fix for this or do I now have to buy two new lids for my new bowl?

Laura

laura_blunk - Contestar

I tried to attach the lid with bowl inserted with handle in back. Now I can not separate the lid from the bowl. Lid comes apart on each place except for the clamp opposite the feeder. Help!!!!

maxine snider - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 18

Ultimos 30 días: 77

Todo El Tiempo: 6,001