Cuisinart DCC-1100 Hot Plate Replacement

Introducción

This guide will help you replace the hot plate of the Cuisinart DCC-1100. Please have a replacement hot plate ready for the installation and unplug the machine before beginning work.

Qué necesitas

Paso 2

Remove the coffee pot and place the coffee maker upside down.

Traducir

Paso 3

Remove the five 1.6mm Phillips #1 screws from the bottom panel.

Traducir

Paso 5

Remove the two 1.6mm Phillips #0 screws from the retaining bracket on the heating element.

Traducir

Paso 6

Remove the retaining bracket and allow it to hang off of the heating element.

Traducir

Paso 7

Remove the hot plate from the heating element.
New thermal paste should be applied at time of installation.

Traducir

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Josh Harvey

Miembro Desde 01/25/18

886 Reputación

4 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

USF Tampa, Team S20-G4, Passmore Spring 2018 Miembro de USF Tampa, Team S20-G4, Passmore Spring 2018

USFT-PASSMORE-S18S20G4

4 Miembros

7 Guías creadas

13 comentarios

thank you for this informative display.

I have broken many expensive glass carafs for my cuisinart coffeemaker and finally purchased a cuisinart thermal caraf.

I do not need the hotplate to heat, so what do I do to stop the heating process?

I imagine I would need to remove one of the attached lines to the heating element, yes?

Thanks.

Luciano

luciano1213@msn.com

Luciano Muzzatti - 20 de dic. de 2018 Contestar

Hi, Thanks for sharing this information. I have an older Krups coffee maker that still works great but the hot plate is warn. I cannot seem to find a replacement plate for any Krups coffee maker models. Any suggestions? Thanks!

Paulette Paglia - 26 de feb. de 2019 Contestar

Josh

where do I buy the replacement hot plate?? I have the sis 15 coffeemaker and I have googled all over the place?? Thank u

linkev428 - 2 de nov. de 2019 Contestar

Yes, where do you buy the part??

Kathy Johnston - 18 de ene. de 2020 Contestar

Yes my question is where do you get the new hot plate? Any direction appreciated.

DougB - 28 de mar. de 2020 Contestar

I replaced hot plate with a stainless steel disk bought on Amazon 1/8” thick and 4 1/2” diameter $5 plus shipping. Works a charm.

Peter - 19 de sep. de 2020 Contestar

Thanks--great tip! Did you use thermal paste? What is it--the heat sink compound used in PCs, or something else? Thanks!

Jan Pendleton - 14 de abr. de 2022