Repara tus cosas Comunidad Tienda

CrystalView NB4-35788 Auxiliary Speakers Replacement

Introducción

Replace the speakers to improve the sound quality of your device.

Qué necesitas

  1. CrystalView NB4-35788 Auxiliary Speakers Replacement, Auxiliary Speakers: paso 1, imagen 1 de 1

    • Power off the device before beginning disassembly.

    • Using a Phillips #00 Screwdriver, take out the following screws:

    • Two 6 mm screws

    • Three 4 mm screws

    • Four 3 mm screws

    • These screws can be taken out in any order.

    Editar

  2. CrystalView NB4-35788 Auxiliary Speakers Replacement: paso 2, imagen 1 de 1

    • Using a Phillips #00 Screwdriver, remove the screws located under the top two standoffs.

    Editar

  4. CrystalView NB4-35788 Auxiliary Speakers Replacement: paso 3, imagen 1 de 1

    • Remove the cover off the back of the device.

    Editar

  5. CrystalView NB4-35788 Auxiliary Speakers Replacement: paso 4, imagen 1 de 1

    • Two speakers can be found on the device, one in the lower-right corner and one in the lower left-corner.

    Editar

  6. CrystalView NB4-35788 Auxiliary Speakers Replacement: paso 5, imagen 1 de 1

    • Gently pull up on the speaker to remove it. Repeat this for the other speaker.

    Editar

  7. CrystalView NB4-35788 Auxiliary Speakers Replacement: paso 6, imagen 1 de 2 CrystalView NB4-35788 Auxiliary Speakers Replacement: paso 6, imagen 2 de 2

    • De-solder the red and black wires to disconnect the old speaker.

    • Be careful while using a soldering iron as it is extremely hot.

    • Follow the How To Solder and Desolder Connections guide for help.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 136