Saltar al contenido principal

Crosley CR42 Band Replacement

Qué necesitas

  1. Crosley CR42  Band Replacement, Band: paso 1, imagen 1 de 1
    • Check troubleshooting wiki to make sure you aren't doing way more work than you have to!

    • If you believe the band may be broken or out of place, start by unplugging the record player.

  2. Crosley CR42  Band Replacement: paso 2, imagen 1 de 2 Crosley CR42  Band Replacement: paso 2, imagen 2 de 2
    • Make sure the needle is in its resting position off to the side.

    • Gently remove the turntable from the device by lifting it directly upward.

  3. Crosley CR42  Band Replacement: paso 3, imagen 1 de 1
    • Find the band, it may have fallen into the inside of the record player as you removed the turntable.

    • Inspect your band for any tears, rips, or obvious signs of stretching.

  4. Crosley CR42  Band Replacement: paso 4, imagen 1 de 1
    • Flip the turntable over.

    • Locate the notch on the back side of the turntable.

    • The notch will be on the outside edge of the turntable.

  5. Crosley CR42  Band Replacement: paso 5, imagen 1 de 2 Crosley CR42  Band Replacement: paso 5, imagen 2 de 2
    • Wrap the band around the inner circle of the turntable and gently pull the band until you get to the notch.

    • Loop the band around the notch, the band should be taut.

  6. Crosley CR42  Band Replacement: paso 6, imagen 1 de 2 Crosley CR42  Band Replacement: paso 6, imagen 2 de 2
    • Place the turntable back onto the device.

    • Make sure to line up the band with the turning knob, to ensure the band is properly placed.

  7. Crosley CR42  Band Replacement: paso 7, imagen 1 de 1
    • After the turntable is back on the device, gently turn it clockwise until you hear a 'click.'

    • Job well done!

Linea de Meta

Roberto Rosila

Miembro Desde 01/26/14

319 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 1-38, Maness Winter 2014 Miembro de Cal Poly, Team 1-38, Maness Winter 2014

CPSU-MANESS-W14S1G38

4 Miembros

5 Guías creadas

Un comentario

My CR42 has a plastic piece that will not let me simply pull the turntable off. I don't want to try to hard to break it, but I also don't know how to get it off to replace the band.

athena - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 90

Todo El Tiempo: 4,832