Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement

Introducción

If your Crock-Pot Express Crock Multi-Cooker does not seal properly, use this guide to replace your bobber valve.

Qué necesitas

  1. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: paso 1, imagen 1 de 3 Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: paso 1, imagen 2 de 3 Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: paso 1, imagen 3 de 3

    • Orient the crock pot where the lid locked and unlocked icons are visible.

    • Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other.

    • Remove the lid.

    Traducir

  3. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Bobber Valve: paso 2, imagen 1 de 1

    • Flip the lid over and expose plastic washer.

    Traducir

  4. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement: paso 3, imagen 1 de 1

    • Pull the plastic washer off the bobber valve and allow the bobber valve to fall out

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

7 comentarios

Ok I followed your directions but the new valve just keeps calling out?

dpataky1952 - Contestar

First time I used this but the bobber valve ports steam and does not stop ( unit is brand new )

Archerkc - Contestar

would be nice to see the other side of this. is it just supposed to be a hole on the outside up top? it is letting out air…when im trying to pressure cook.

shaycooks2 - Contestar

Ditto I was wanting to know the same thing!

kate2272 -

Ditto. Mine does the same thing.. suggestions?

Tina Royce - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 20

Ultimos 30 días: 130

Todo El Tiempo: 26,352