Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

If your Crock-Pot Express Crock Multi-Cooker does not seal properly, use this guide to replace your bobber valve.

Herramientas

No se especificaron herramientas.

  1. Orient the crock pot where the lid locked and unlocked icons are visible. Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other. Remove the lid.
    • Orient the crock pot where the lid locked and unlocked icons are visible.

    • Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other.

    • Remove the lid.

  2. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  3. Flip the lid over and expose plastic washer.
    • Flip the lid over and expose plastic washer.

  4. Pull the plastic washer off the bobber valve and allow the bobber valve to fall out
    • Pull the plastic washer off the bobber valve and allow the bobber valve to fall out

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Ok I followed your directions but the new valve just keeps calling out?

dpataky1952 - Contestar

First time I used this but the bobber valve ports steam and does not stop ( unit is brand new )

Archerkc - Contestar

would be nice to see the other side of this. is it just supposed to be a hole on the outside up top? it is letting out air…when im trying to pressure cook.

shaycooks2 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 12

Ultimos 7 días: 92

Ultimos 30 días: 476

Todo El Tiempo: 9,373