Introducción
WARNING: Once the power cord has been identified as the item that needs replacement, make sure that the device is disconnected from any power supply.
Qué necesitas
-
-
Remove the two 1" Phillips screws using a #1 Phillips screwdriver.
-
Remove the three 1/2" Phillips screws using a #1 Phillips screwdriver.
-
Once the five screws are removed, lift the handle cover from the saw.
-
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.