Repara tus cosas Comunidad Tienda

Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement

Introducción

Follow this guide to replace the fuel tank on your Craftsman 9.0 HP 26 Inch Snow Blower.

The Fuel tank only would need to be replaced on your Craftsman 9.0 HP 26 Inch Snow Blower if it is dented, cracked, or damaged.

When replacing the fuel tank, the hazardous material that you will be in contact with will be the fuel, gasoline.

Gasoline is a flammable liquid; ensure the gas tank is empty before working on the snow blower tank.

Qué necesitas

  1. Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement, Fuel Tank: paso 1, imagen 1 de 2 Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement, Fuel Tank: paso 1, imagen 2 de 2

    • Remove the fuel line from the fuel tank with pliers.

    Editar

  2. Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 2, imagen 1 de 2 Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 2, imagen 2 de 2

    • Take off the fuel cap and place a safe container under the fuel line.

    • Make sure to drain all of the fuel from the fuel tank into the container.

    Editar

  3. Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 3, imagen 1 de 2 Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 3, imagen 2 de 2

    • Remove the four support bolts on the top of the tank and motor with a crescent wrench or socket wrench.

    Editar

  5. Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 4, imagen 1 de 1

    • Lift the fuel tank off of the lower supporting brackets.

    Editar

  6. Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 5, imagen 1 de 1

    • Replace the cracked fuel tank and place the new one onto the lower supporting brackets.

    Editar

  7. Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 6, imagen 1 de 1

    • Screw in the top four supporting bracket bolts with a crescent wrench or socket wrench to hold the new fuel tank in place.

    Editar

  8. Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 7, imagen 1 de 1

    • Reconnect the fuel line and hose clamp.

    Editar

  9. Craftsman 9.0 HP 26 Inch Snow Blower Fuel Tank Replacement: paso 8, imagen 1 de 1

    • Fill the tank with fuel.

    • Check to make sure that the hose clamp is not leaking.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Megan Smith

Miembro Desde 10/07/19

169 Reputación

1 Guía escrita

Insignias: 2

Equipo

Eastern Washington University, Team S27-G14, Munoz Fall 2019 Miembro de Eastern Washington University, Team S27-G14, Munoz Fall 2019

EWU-MUNOZ-F19S27G14

1 Miembro

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 25

Todo El Tiempo: 1,987