Saltar al contenido principal

Introducción

Instructions how to remove front assembly panel to access internal components of the Creative Zen V Plus.

Partes

No se especificaron partes.

  1. Find the mating groove running along the side of device.   Use an ifixit opening tool to pry the two mating surfaces apart with a twisting motion.
    • Find the mating groove running along the side of device. Use an ifixit opening tool to pry the two mating surfaces apart with a twisting motion.

    • Once the surfaces have been separated, using your fingers, pull the two surfaces apart evenly around the edge of the device.

    • During reassembly, be sure to press the two pieces together all the way around the perimeter to ensure good connection.

Conclusión

To reassemble your device, follow these steps in reverse order.

Brock Schaffer

Miembro Desde 26/10/16

445 Reputación

3 Guías creadas

Equipo

IUPUI, Team 2-5, Baechle Fall 2016 Miembro de IUPUI, Team 2-5, Baechle Fall 2016

IUPUI-BAECHLE-F16S2G5

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 120