1. Turn the calculator over so the blue Texas Instruments logo is facing you.
    • Turn the calculator over so the blue Texas Instruments logo is facing you.

    • Slide the blue cover downwards until it is completely removed from the calculator.

  2. If the keypad is not already connected, skip the next 2 steps.
    • If the keypad is not already connected, skip the next 2 steps.

    • Turn the calculator over so the keypad is facing down.

    • Locate the sliding latch towards the bottom of the calculator.

    • Slide the latch to the right to release the keypad.

    • At the same time, pull the keypad downwards.

    • Take note of where the keypad and the calculator connect.

    • Slide the keypad directly into where it connects to the calculator until you hear a click. Readjust as necessary.

    • Press the "ON" button to make sure that the calculator turns on. If the calculator turns on correctly, you have properly inserted the keypad.

Conclusión

If the keypad was inserted properly, the calculator should turn on without any errors.

Mariel Sanchez

Miembro Desde 27/09/12

1 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 7-52, Forte Fall 2012 Miembro de Cal Poly, Team 7-52, Forte Fall 2012

CPSU-FORTE-F12S7G52

5 Miembros

11 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 7

Últimos 7 Días: 48

Últimos 30 Días: 140

Todo El Tiempo: 9,627