Saltar al contenido principal

Conair Infiniti Pro Model 259NP Back Panel Replacement

Qué necesitas

  1. Conair Infiniti Pro Model 259NP Back Panel Replacement, Back Panel: paso 1, imagen 1 de 1
    • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

    • Hold the hair dryer by the handle so that the back panel faces up.

  2. Conair Infiniti Pro Model 259NP Back Panel Replacement: paso 2, imagen 1 de 2 Conair Infiniti Pro Model 259NP Back Panel Replacement: paso 2, imagen 2 de 2
    • Remove the two 15.875 mm Phillips #2 screws from the back panel.

  3. Conair Infiniti Pro Model 259NP Back Panel Replacement: paso 3, imagen 1 de 3 Conair Infiniti Pro Model 259NP Back Panel Replacement: paso 3, imagen 2 de 3 Conair Infiniti Pro Model 259NP Back Panel Replacement: paso 3, imagen 3 de 3
    • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

    • Continue separating the back panel, working along the seam.

    • With moderate force, completely remove the back panel from the hair dryer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Timothy Lo

Miembro Desde 04/22/14

1,172 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 10-58, Amido Spring 2014 Miembro de Cal Poly, Team 10-58, Amido Spring 2014

CPSU-AMIDO-S14S10G58

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 8

Ultimos 30 días: 40

Todo El Tiempo: 6,298