Repara tus cosas Comunidad Tienda

Conair Infiniti PRO Curling Iron Motherboard Replacement

Introducción

This guide will build off of the Housing and Power Cord Removal guides to remove and replace the motherboard.

Qué necesitas

  1. Conair Infiniti PRO Curling Iron Motherboard Replacement, Housing: paso 1, imagen 1 de 1

    • Remove the Philips #1 28 mm.

    • Make sure device is unplugged and cool before attempting to replace parts.

    Editar

  2. Conair Infiniti PRO Curling Iron Motherboard Replacement: paso 2, imagen 1 de 1

    • Remove the Philips #1 22 mm screws.

    Editar

  3. Conair Infiniti PRO Curling Iron Motherboard Replacement: paso 3, imagen 1 de 3 Conair Infiniti PRO Curling Iron Motherboard Replacement: paso 3, imagen 2 de 3 Conair Infiniti PRO Curling Iron Motherboard Replacement: paso 3, imagen 3 de 3

    • Pry off the housing using a plastic spudger.

    Editar

  5. Conair Infiniti PRO Curling Iron Motherboard Replacement, Power Cord: paso 4, imagen 1 de 1

    • Pull power chord out.

    Editar

  6. Conair Infiniti PRO Curling Iron Motherboard Replacement, Motherboard: paso 5, imagen 1 de 1

    • Heat up your soldering gun and desolder the red wire from the motherboard as shown.

    • Note the location of wire attachment.

    Editar

  7. Conair Infiniti PRO Curling Iron Motherboard Replacement: paso 6, imagen 1 de 1
    Herramienta utilizada en este paso:
    Desoldering Pump
    $3.99
    Comprar

    • With your soldering gun, desolder the white wire from the motherboard as shown.

    • Note the location of wire attachment.

    Editar

  8. Conair Infiniti PRO Curling Iron Motherboard Replacement: paso 7, imagen 1 de 1

    • Once both wires are desoldered the motherboard can be removed.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order, making sure to resolder the wires correctly into the replacement motherboard.

2 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Jonathon Bruer

Miembro Desde 11/09/17

607 Reputación

5 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

IUPUI, Team S7-G5, Baechle Fall 2017 Miembro de IUPUI, Team S7-G5, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G5

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 13

Todo El Tiempo: 582