Repara tus cosas Comunidad Tienda

Conair Infiniti PRO Curling Iron Heating Element Replacement

Introducción

This guide will show how to replace the barrel heating element of your Conair Infiniti PRO Curling Iron. It requires the housing, power cord and motherboard to be removed beforehand.

Qué necesitas

  1. Conair Infiniti PRO Curling Iron Heating Element Replacement, Housing: paso 1, imagen 1 de 1

    • Remove the Philips #1 28 mm.

    • Make sure device is unplugged and cool before attempting to replace parts.

    Editar

  2. Conair Infiniti PRO Curling Iron Heating Element Replacement: paso 2, imagen 1 de 1

    • Remove the Philips #1 22 mm screws.

    Editar

  3. Conair Infiniti PRO Curling Iron Heating Element Replacement: paso 3, imagen 1 de 3 Conair Infiniti PRO Curling Iron Heating Element Replacement: paso 3, imagen 2 de 3 Conair Infiniti PRO Curling Iron Heating Element Replacement: paso 3, imagen 3 de 3

    • Pry off the housing using a plastic spudger.

    Editar

  5. Conair Infiniti PRO Curling Iron Heating Element Replacement, Power Cord: paso 4, imagen 1 de 1

    • Pull power chord out.

    Editar

  6. Conair Infiniti PRO Curling Iron Heating Element Replacement, Motherboard: paso 5, imagen 1 de 1

    • Heat up your soldering gun and desolder the red wire from the motherboard as shown.

    • Note the location of wire attachment.

    Editar

  7. Conair Infiniti PRO Curling Iron Heating Element Replacement: paso 6, imagen 1 de 1
    Herramienta utilizada en este paso:
    Desoldering Pump
    $3.99
    Comprar

    • With your soldering gun, desolder the white wire from the motherboard as shown.

    • Note the location of wire attachment.

    Editar

  8. Conair Infiniti PRO Curling Iron Heating Element Replacement: paso 7, imagen 1 de 1

    • Once both wires are desoldered the motherboard can be removed.

    Editar

  9. Conair Infiniti PRO Curling Iron Heating Element Replacement, Heating Element: paso 8, imagen 1 de 2 Conair Infiniti PRO Curling Iron Heating Element Replacement, Heating Element: paso 8, imagen 2 de 2

    • Remove the heating element mount. This will free up the heating element barrel for replacement.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Jonathon Bruer

Miembro Desde 11/09/17

607 Reputación

5 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

IUPUI, Team S7-G5, Baechle Fall 2017 Miembro de IUPUI, Team S7-G5, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G5

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 22

Todo El Tiempo: 1,516