Saltar al contenido principal

Computer King Muffin Kinder 7 Screen Replacement

Qué necesitas

  1. Computer King Muffin Kinder 7 Screen Replacement, Screen: paso 1, imagen 1 de 2 Computer King Muffin Kinder 7 Screen Replacement, Screen: paso 1, imagen 2 de 2
    • Use the plastic opening tool help push out the microSD card from the microSD slot.

  2. Computer King Muffin Kinder 7 Screen Replacement: paso 2, imagen 1 de 1
    • Use the plastic opening tool to unclip the plastic front from the plastic back. Use the MicroSD slot to initially start the unclipping.

  3. Computer King Muffin Kinder 7 Screen Replacement: paso 3, imagen 1 de 2 Computer King Muffin Kinder 7 Screen Replacement: paso 3, imagen 2 de 2
    • Unscrew the nine 3.0 mm Phillips #00 screws.

  4. Computer King Muffin Kinder 7 Screen Replacement: paso 4, imagen 1 de 1
    • The battery is glued onto the black plastic. Use the plastic opening tool to pry the battery from the black plastic

  5. Computer King Muffin Kinder 7 Screen Replacement: paso 5, imagen 1 de 2 Computer King Muffin Kinder 7 Screen Replacement: paso 5, imagen 2 de 2
    • There will be a black strip connected to the screen.

    • Use the pointy end of the spudger to unstick the black strip that is glued onto the screen.

  6. Computer King Muffin Kinder 7 Screen Replacement: paso 6, imagen 1 de 3 Computer King Muffin Kinder 7 Screen Replacement: paso 6, imagen 2 de 3 Computer King Muffin Kinder 7 Screen Replacement: paso 6, imagen 3 de 3
    • You will need to remove 2 ribbon cables, one that is connected to the touch screen (by the battery) and one that is connected to the yellow plastic (by the speaker).

    • Use the flat end of the spudger to lift the black panel covering the ribbon cables.

  7. Computer King Muffin Kinder 7 Screen Replacement: paso 7, imagen 1 de 1
    • Pull the two ribbon cables out so that they are no longer connected to the logic board.

  8. Computer King Muffin Kinder 7 Screen Replacement: paso 8, imagen 1 de 1
    • Lift up the logic board and black plastic so that they are no longer covering the screen

    • Lift out the screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Katherine

Miembro Desde 01/22/15

439 Reputación

3 Guías creadas

Equipo

UWT Liner: Group 2 Miembro de UWT Liner: Group 2

Community

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 354