Saltar al contenido principal

Introducción

This guide will detail how to replace the RAM in a CQ60-211DX.

Partes

No se especificaron partes.

  1. Power off the CQ60 and unplug all cables connected to it.
    • Power off the CQ60 and unplug all cables connected to it.

  2. Using a standard #2 Phillips-head screwdriver, remove the back compartment of the CQ60 to access the motherboard.
    • Using a standard #2 Phillips-head screwdriver, remove the back compartment of the CQ60 to access the motherboard.

  3. Use your fingers to push the retention clips away from the RAM sticks, and carefully pull out the old RAM.
    • Use your fingers to push the retention clips away from the RAM sticks, and carefully pull out the old RAM.

  4. Carefully insert the new RAM, and ensure that it is placed in the correct slots.
    • Carefully insert the new RAM, and ensure that it is placed in the correct slots.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Garrett Carter

Miembro Desde 21/09/18

471 Reputación

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 140