Compaq Mini 110 RAM Replacement

Escrito Por: alea (y 13 de otros participantes)

Comentarios: 0
Favoritos: 2
Terminaciones: 3

Dificultad

Fácil

Pasos

Tiempo Requerido

1 - 3 minutos

Introducción

Use this guide to access and replace your RAM. Assembly is reverse of disassembly. Consider utilizing an electrostatic discharge strap to protect components from damage. Disconnect all power sources and remove the battery pack before beginning this repair.

Herramientas

Comprar estas herramientas

Phillips #0 Screwdriver

$5.49

Comprar

Partes

Comprar estas partes

PC2-5300 1 GB RAM Chip

$8.99

Comprar
PC2-5300 2 GB RAM Chip

$14.99

Comprar

Paso 1 RAM

Unscrew the two screws on the bottom of the laptop covering the memory compartment and remove the cover.

Unscrew the two screws on the bottom of the laptop covering the memory compartment and remove the cover.
The screws are attached to the panel.

Traducir

Paso 2

Push out side tabs and pull out old RAM module. Insert new module in place of old module. Be sure to evenly insert 'gold pins' in the same orientation that the old module was removed. While sliding module in, press side tabs in place (red rectangles in picture).

Push out side tabs and pull out old RAM module. Insert new module in place of old module. Be sure to evenly insert 'gold pins' in the same orientation that the old module was removed. While sliding module in, press side tabs in place (red rectangles in picture).

Traducir