Saltar al contenido principal

Commodore 64 Opening the Case Prerequisite Guide

Qué necesitas

  1. Commodore 64 Opening the Case Prerequisite Guide, Removing screws: paso 1, imagen 1 de 3 Commodore 64 Opening the Case Prerequisite Guide, Removing screws: paso 1, imagen 2 de 3 Commodore 64 Opening the Case Prerequisite Guide, Removing screws: paso 1, imagen 3 de 3
    • 1. Remove three 6.75mm ph2 screw heads from the casing

  2. Commodore 64 Opening the Case Prerequisite Guide, Opening: paso 2, imagen 1 de 2 Commodore 64 Opening the Case Prerequisite Guide, Opening: paso 2, imagen 2 de 2
    • 2. Split the case of the C64 open by pulling up on the case towards you

    • Do not pull too hard that you break the clips.

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Equipo

USF Tampa, Team 13-6, Staggers Fall 2014 Miembro de USF Tampa, Team 13-6, Staggers Fall 2014

USFT-STAGGERS-F14S13G6

4 Miembros

15 Guías creadas

Un comentario

Is the Commodore 64x with the same screw?

anon - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 40

Todo El Tiempo: 5,143