Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Have you troubleshooted everything else and nothing is working to fix the device? Replacing the main power board might be your last resort.
Qué necesitas
-
-
Carefully turn the lantern upside down.
-
Remove the three 1.2 mm Phillips #0 screws from the base of the lantern.
-
-
-
-
Remove the single 1.2 mm Phillips #1 screw on the bottom of the lantern.
-
Remove the plastic barrier.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.