Saltar al contenido principal

Introducción

The purpose of this guide is to give step-by-step instruction on how to clean the controller ports on a ColecoVision.

Herramientas

Partes

No se especificaron partes.

  1. Unplug the controllers from their ports.
    • Unplug the controllers from their ports.

  2. Skip the upgrade.

    Descuento de $10 en tu factura de $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Spray the insides of the ports a few times with compressed air.
    • Spray the insides of the ports a few times with compressed air.

  4. Plug the controllers back into their ports.
    • Plug the controllers back into their ports.

Conclusión

To reassemble your device, plug the controllers into the ports they were taken out of.

Juin Yeh

Miembro Desde 17/10/18

205 Reputación

2 Guías creadas

Equipo

UW Tacoma, Team S1-G2, Rose Fall 2018 Miembro de UW Tacoma, Team S1-G2, Rose Fall 2018

UWT-ROSE-F18S1G2

4 Miembros

11 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 11

Todo El Tiempo: 102