Repara tus cosas Comunidad Tienda

Coby DVD-R11000 3-Pin Power Cable Replacement

Qué necesitas

  1. Coby DVD-R11000 3-Pin Power Cable Replacement, Outer Casing: paso 1, imagen 1 de 3 Coby DVD-R11000 3-Pin Power Cable Replacement, Outer Casing: paso 1, imagen 2 de 3 Coby DVD-R11000 3-Pin Power Cable Replacement, Outer Casing: paso 1, imagen 3 de 3

    • Remove the four 1cm screws, two on each side, of the DVD player with the Phillips #1 screwdriver.

    • Remove the five 1cm screws on the back of the DVD player with the Phillips #1 screwdriver.

    • It is not required to remove the other seven screws in the middle between the I/O ports.

    Editar

  3. Coby DVD-R11000 3-Pin Power Cable Replacement: paso 2, imagen 1 de 3 Coby DVD-R11000 3-Pin Power Cable Replacement: paso 2, imagen 2 de 3 Coby DVD-R11000 3-Pin Power Cable Replacement: paso 2, imagen 3 de 3

    • Position the DVD player so that the back is facing you

    • Grab underneath the sides of the DVD player and lift the front of it upwards.

    • Carefully pull the top of the casing off

    Editar

  4. Coby DVD-R11000 3-Pin Power Cable Replacement, 3-Pin Power Cable: paso 3, imagen 1 de 2 Coby DVD-R11000 3-Pin Power Cable Replacement, 3-Pin Power Cable: paso 3, imagen 2 de 2

    • Gently pinch the 3-pin white adapter of the wire connecting the power cord to the circuit board.

    • Remove the wire from the circuit board.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Andrew

Miembro Desde 10/22/14

501 Reputación

5 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

UMass Dartmouth, Team 1-6, Shastany Fall 2014 Miembro de UMass Dartmouth, Team 1-6, Shastany Fall 2014

UMASSD-SHASTANY-F14S1G6

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 437