Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

If you are having difficulties looking at the display screen of your Cobra SPX 5300 this guide will walk you through its replacement.

  1. Remove the four 9.5 mm Phillips #0 screws from the back of the device. Remove the four 9.5 mm Phillips #0 screws from the back of the device.
    • Remove the four 9.5 mm Phillips #0 screws from the back of the device.

  2. Pull the black plastic back case off of the device. Pull the black plastic back case off of the device.
    • Pull the black plastic back case off of the device.

  3. Lift up the motherboard and lay it flat next to the device.
    • Lift up the motherboard and lay it flat next to the device.

    • Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

  4. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch
  5. Remove the windshield bracket mount.
    • Remove the windshield bracket mount.

  6. Remove the four 4.8 mm Phillips #00 screws from the buttonboard.
    • Remove the four 4.8 mm Phillips #00 screws from the buttonboard.

  7. Lift buttonboard to expose silver button plate.
    • Lift buttonboard to expose silver button plate.

  8. Remove the silver button plate by gripping one of the corners  and pulling up.
    • Remove the silver button plate by gripping one of the corners and pulling up.

  9. Lift the front black plastic display screen. Lift the front black plastic display screen.
    • Lift the front black plastic display screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Fanny Auad

Miembro Desde 25/09/15

265 Reputación

2 Guías creadas

Hi,

Cobra SPX 7800 BT - Radar Detector

Does anyone know where could I purchase or look for a replacement screen for a Cobra SPX 7800 Bt detector, mine came with several cracks on the bottom right hand corner. It works, beeps ok, no color screen display and therefore unable to change settings.

Thanks

Ancient warrior - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 19

Todo El Tiempo: 866