Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

This guide will walk you through replacing the audio dial.

  1. Remove the four 9.5 mm Phillips #0 screws from the back of the device. Remove the four 9.5 mm Phillips #0 screws from the back of the device.
    • Remove the four 9.5 mm Phillips #0 screws from the back of the device.

  2. Pull the black plastic back case off of the device. Pull the black plastic back case off of the device.
    • Pull the black plastic back case off of the device.

  3. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch
  4. Lift up the motherboard and lay it flat next to the device.
    • Lift up the motherboard and lay it flat next to the device.

    • Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

  5. Remove the windshield bracket mount.
    • Remove the windshield bracket mount.

  6. Remove the one 4.8 mm Phillips #00 screw from the center of the audio dial.
    • Remove the one 4.8 mm Phillips #00 screw from the center of the audio dial.

  7. Remove audio dial. Remove audio dial.
    • Remove audio dial.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Samantha Delle

Miembro Desde 25/09/15

101 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 417