Repara tus cosas Comunidad Tienda

Cobra 29 LTD Classic Outer Cover Replacement

Introducción

This outer cover is the main cover that protects the inner electrical components. Perform the guide on a flat non-conductive surface to avoid electrical shock and damage to your device.

Qué necesitas

  1. Cobra 29 LTD Classic Outer Cover Replacement, Power Cable: paso 1, imagen 1 de 2 Cobra 29 LTD Classic Outer Cover Replacement, Power Cable: paso 1, imagen 2 de 2

    • Turn the power switch, the leftmost knob, counterclockwise to off.

    Traducir

  2. Cobra 29 LTD Classic Outer Cover Replacement: paso 2, imagen 1 de 2 Cobra 29 LTD Classic Outer Cover Replacement: paso 2, imagen 2 de 2

    • Turn the device around and firmly pull the power cable plug to remove it from the radio.

    Traducir

  3. Cobra 29 LTD Classic Outer Cover Replacement, Antenna Cable: paso 3, imagen 1 de 2 Cobra 29 LTD Classic Outer Cover Replacement, Antenna Cable: paso 3, imagen 2 de 2

    • Unscrew the securing cap counterclockwise from the antenna connector.

    Traducir

  4. Cobra 29 LTD Classic Outer Cover Replacement: paso 4, imagen 1 de 2 Cobra 29 LTD Classic Outer Cover Replacement: paso 4, imagen 2 de 2

    • Gently pull the antenna cable to remove it from the back of the radio.

    Traducir

  6. Cobra 29 LTD Classic Outer Cover Replacement, Microphone: paso 5, imagen 1 de 2 Cobra 29 LTD Classic Outer Cover Replacement, Microphone: paso 5, imagen 2 de 2

    • Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

    Traducir

  7. Cobra 29 LTD Classic Outer Cover Replacement: paso 6, imagen 1 de 1

    • Gently unplug the microphone plug.

    Traducir

  8. Cobra 29 LTD Classic Outer Cover Replacement, Outer Cover: paso 7, imagen 1 de 2 Cobra 29 LTD Classic Outer Cover Replacement, Outer Cover: paso 7, imagen 2 de 2

    • Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver.

    Traducir

  9. Cobra 29 LTD Classic Outer Cover Replacement: paso 8, imagen 1 de 3 Cobra 29 LTD Classic Outer Cover Replacement: paso 8, imagen 2 de 3 Cobra 29 LTD Classic Outer Cover Replacement: paso 8, imagen 3 de 3

    • Gently life and remove the top cover.

    Traducir

  10. Cobra 29 LTD Classic Outer Cover Replacement: paso 9, imagen 1 de 3 Cobra 29 LTD Classic Outer Cover Replacement: paso 9, imagen 2 de 3 Cobra 29 LTD Classic Outer Cover Replacement: paso 9, imagen 3 de 3

    • Gently set down on a hard, flat, non-conductive surface to minimize risk of shock or breaking your radio.

    • Carefully flip the radio over.

    Traducir

  11. Cobra 29 LTD Classic Outer Cover Replacement: paso 10, imagen 1 de 2 Cobra 29 LTD Classic Outer Cover Replacement: paso 10, imagen 2 de 2

    • Unscrew the four 6.0mm Phillips head screws counterclockwise on the left and right side of the device that connect the remaining cover, using a #1 Phillips head screwdriver.

    Traducir

  12. Cobra 29 LTD Classic Outer Cover Replacement: paso 11, imagen 1 de 3 Cobra 29 LTD Classic Outer Cover Replacement: paso 11, imagen 2 de 3 Cobra 29 LTD Classic Outer Cover Replacement: paso 11, imagen 3 de 3

    • Watch out for the wires connected to the speaker. These short wires will not allow you to move the cover very far.

    • Gently lift and remove the case cover.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Chase

Miembro Desde 10/20/13

267 Reputación

2 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

Cal Poly, Team 11-37, Amido Fall 2013 Miembro de Cal Poly, Team 11-37, Amido Fall 2013

CPSU-AMIDO-F13S11G37

4 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 10

Todo El Tiempo: 1,645