Introducción
Esta guía pasará por el proceso de clonación de su software, sistema operativo y datos existentes en un nuevo disco duro.
(SuperDuper ahora es compatible con Big Sur y Monterey).
NOTA: Con la introducción del macOS Catalina, ciertos pasos de esta guía están desfasados.
IMPORTANTE: No se recomienda clonar el disco duro si tienes un Mac que usa una partición de recuperación (MacOS 10.7 - presente) o una recuperación de Internet (2011 - presente). En su lugar, para mover sus datos a una nueva unidad, primero crea una copia de seguridad de su unidad existente. Luego, usa la recuperación por Internet o crea una unidad externa de arranque para estar listo para instalar MacOS en la nueva unidad y migrar los datos después.
Si estás satisfecho con la instalación de su sistema operativo actual y simplemente deseas actualizar la capacidad de su disco duro, puedes clonar su disco duro actual a tu nuevo disco.
Para clonar un disco duro, necesitarás un modo de conectar el segundo disco duro a tu Mac. Nuestra caja de disco duro de 2,5" o uno de nuestros kits de actualización de discos duros funcionan muy bien para clonar tu disco.
Para clonar tu disco duro, te recomendamos un programa llamado SuperDuper!, de Shirt Pocket Software.
Las siguientes instrucciones asumen que vas a usar SuperDuper! y la carcasa del disco duro de 2,5" para clonar en una nueva unidad de 2,5". Si estás usando una configuración diferente, el proceso de instalación puede ser algo diferente.
Qué necesitas
-
-
Puerto de datos estrecho
-
Puerto de alimentación ancho
-
-
-
Use el destornillador incluido para remover los dos tornillos Phillips.
-
-
-
Pon la unidad en la bandeja de plástico y alinea los puertos de la unidad con el zócalo de la bandeja.
-
Empuja cuidadosamente la unidad en el zócalo de la bandeja para asentar los puertos.
-
Presiona el borde levantado de la unidad hacia abajo en la bandeja de plástico.
It is helpful to use something thin like a credit card as a shoe horn here - while the back edge is still raised, insert a thin card between the edge of the drive and the foam block, then push the drive edge down and slip the card out. This will allow the end of the drive to sit flush against the block without any overlap or mashing of the block. It also eliminates the need to keep pressing or forcing the edge of the drive to fit.
-
-
-
-
Enciende tu Mac y espera hasta que se cargue completamente.
-
Conecta el habitáculo en el puerto USB de tu Mac.
-
-
-
Selecciona tu nuevo disco duro de la columna izquierda en la Utilidad de Disco.
-
Selecciona la opción Borrar cerca de la fila superior de botones.
-
Elige un nombre para tu nueva unidad, y en la opción de formato, selecciona "APFS".
-
Presiona el botón borrar.
-
Sal de la Utilidad de Disco una vez que se haya completado el borrado.
When I try to partition, I message comes up saying "file system formatter failed". What do I do?
On latest MacOS (from High Sierra on) you should use APFS. This is mandatory on Catalina, but in this case the system update itself converted the existing drive from MacOS Journaled to APFS.
-
-
-
Descarga e instala SuperDuper!
-
En el menú desplegable Go, elige Aplicaciones.
-
¡Abre SuperDuper!
With the newer OS-X & MacOS releases its wise not to use 3rd party cloning software.
A better approach is to use Apple supplied Migration Assistant during the OS install on a fresh drive, or you can do it later its located in the Utility folder.
Sadly, cloning apps don't create the hidden partition the OS installer does and if you are not careful you can wipe it out with the cloning app.
An alternative is using Disk Utilities Imaging tool which allows you to create an image file that you can then reuse over and over again if you have to manage multiple systems this offers a very quite way of cloning a standard set of config & apps.
-
-
-
Espera a que la unidad se copie (esto podría durar varias horas si tienes mucho en su disco duro).
-
Cuando SuperDuper! te solicite el registro, elije "Registrarse" para comprar el software o "Más tarde" para registrarte más tarde.
-
Una vez completada la copia, haz clic en "Aceptar" y sal de SuperDuper!
-
-
-
En este punto, tu nuevo disco duro debe ser un clon de tu unidad existente y listo para instalar.
-
Mantén el habitáculo conectado al ordenador y reinícialo. Mantén presionada la tecla "opción" mientras se reinicia hasta que aparezca un menú de opciones de inicio.
Everything worked up until I was trying to boot from my SSD. I figured it out though if anyone else is having the same problem in 2023. Right after quiting SuperDuper! Click apple > system preferences > start up disk > click lock to make changes > select new SSD > restart.
-
-
-
Selecciona tu nuevo disco duro en el menú de opciones de arranque.
-
Espera a que el ordenador se inicie para verificar si funciona correctamente.
-
Tu nuevo disco duro ya está listo para instalarse en tu ordenador.
Can an Apple Time Machine be used to facilitate the cloning of a new hard drive, in LIEU of the $28.00 SUPER DUPER! applications program? My aged MacBook Pro 1297 17” is running OS10.11.6 and I am clueless as to whether or not the original hard drive is even partitioned: After 11 years, it may be time for a new SSD…
-
Retira tu nuevo disco duro de la caja externa e instálalo en tu ordenador. Las instrucciones de instalación están disponibles para una variedad de Macs.
Retira tu nuevo disco duro de la caja externa e instálalo en tu ordenador. Las instrucciones de instalación están disponibles para una variedad de Macs.
Cancelar: No complete esta guía.
110 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
24 comentarios
This guide was straightforward and helpful along the way when I replaced my hard drive! My only comment is that this should be a link in the "MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement" article, since the Youtube videos link to each other, but the articles do not. Thanks for all your help with these fantastic guides!
Wow! Thank you Mike.
Everything went very well with a big bonus. My older version of Photoshop does not work with the newer Mac operating systems. Now that I installed a new 1TB hard drive, I can upgrade OS if I want. Then I can use the old drive in an internal enclosure replacing the DVD running the old OS X keeping all of my older Adobe apps!
Ifixit rocks!
Hi BuckNYC,
As far as I know, SuperDuper will not clone the BootCamp partition. You will have to use something like Winclone to do that.
Worked fine. Only issue is that before installing the new drive, you need to set it as the boot disk (System Preferences, Startup Disk) Do this when you’ve got it connected to USB (after Step 12) - when you tested that it’s bootable. (I missed this and had a fraught few hours until Dan helped me out.)
Great tutorial Mike! Made it a lot easier to swap my old HD for an SSD. Many Thanks!
Glad to hear it! :)
Mike -
Does this tutorial also work, if I want to switch from FusionDrive to SSD?
Yes - Make a clone on the new SSD first using an external housing, start up from that disk, then split the internal Fusion Drive in the Mini in its HDD and SSD components using Terminal. Reformat the internal SSD and HDD. Shut down, and replace HDD with the new “external” SSD. The SSD-part of the Fusion drive becomes an extra internal SSD. For fastest performance, put OSX on the faster ex-Fusion SSD and datafiles on the newly installed SSD.
Wannes -
IMPORTANT: Cloning the hard drive is not recommended if you have a Mac that uses a recovery partition (MacOS 10.7 - present)
Why?
Dunno - Bombich.com Carbon Copy Cloner (my go-to clone app for years) clones them perfectly and has done so for years.
Wannes -
I am looking to upgrade my 2012 hard drive to an ssd. I would prefer the easiest fastest way of migrating or copying my entire installation to the new drive. Is super duper cloning suggested or is there a better way?
So is Super Duper not recommended even though they’ve updated to include Catalina support? If they aren’t, what’s another method as I’ve read that Time Machine backups may not work as well for complete replacement of the drive? I was about to purchase it, but if anyone has bad experiences with it, please let me know before I do?
Info from Super Duper:
v3.3.1 now available!
The latest version of SuperDuper! is faster, better, fully compatible with macOS Catalina (10.15) - in fact, it's compatible with macOS 10.10 and later, has Smart Wake, Smart Delete, Notification Center support, additional control capabilities, and improves many aspects of the user experience. Of course, it still includes great features like snapshot support, APFS recovery volume support, Backup on Connect, Eject after Copy, Sparse Bundle support, lets you store a bootable backup alongside Time Machine backups, copy Time Machine backups to other drives, and run scheduled copies on demand. As with every update, we've polished and improved many other aspects as well. (A full list can be found by selecting Help > Revision History.)
Easy …. Informative and much appreciated…!
Anyone else having problem with SuperDuper! on BigSur 11.1 ? Tried twice to run it and after 19 hours nothing.
Also tried to boot in recovery mode and clone from there but got broken seal error which seems to be a BigSur issue.
My understanding is that SuperDuper does not work currently with Big Sur (I experiences similar results as Constantine). I used Carbon Copy Clone successfully (they also have a free trial version) that is able to do the file conversion required for Big Sur.
Funktioniert SuperDuper! auch um eine größere 1TB (eingebaute) Festplatte auf die neue 500GB SSD zu klonen?
Zumindest gibt es dieses Video, wo jemand erklärt, wie das geht.
Why should I use SuperDuper over dd?
dd will not "quite" work - if the two drives are different size (the second drive needs to be same or larger size of course), then it seems you have difficulty with modifying the new drive partition table with Disk Utility (anyway that's the situation I'm currently in and trying to solve). Also it duplicates the UUID values, and these are supposed to always be unique I think. Maybe there are ways to fix both these issues, and am now trying to find out if it's possible.
-bob
Does not appear that SuperDuper will handle the case where there are multiple partitions on a drive and let you duplicate everything in one step. And not sure if APFS volumes will work or not. Any other suggestions for how to duplicate a drive with multiple partitions (some HFS, some APFS, some data only, some recovery partitions, basically any possible scenario including BOOTCAMP partitions)? Thanks ....
-bob - Nov 9, 2022