Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a 5/16" socket or wrench, remove the three bolts holding the plastic cover on to the engine.
-
Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using compressed air or a rag, clean debris from the flywheel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using compressed air and a rag, clean the heat sink.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.