Repara tus cosas Comunidad Tienda

Cleaning Debris from Flywheel Screen

Introducción

Due to the nature of lawn mowers, over time large amounts of debris and grass cuttings accumulate and can harm the engine's performance.

Qué necesitas

  1. Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: paso 1, imagen 1 de 3 Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: paso 1, imagen 2 de 3 Cleaning Debris from Flywheel Screen, Cleaning Debris from Flywheel Screen: paso 1, imagen 3 de 3

    • Ensure the engine is off and cooled down before starting this guide.

    • Using a 5/16" socket or wrench, remove the three bolts holding the plastic cover on to the engine.

    • Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it.

    Editar

  3. Cleaning Debris from Flywheel Screen: paso 2, imagen 1 de 2 Cleaning Debris from Flywheel Screen: paso 2, imagen 2 de 2

    • Using compressed air or a rag, clean debris from the flywheel.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Ethan Narad

Miembro Desde 04/19/18

529 Reputación

3 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Cal Poly, Team S25-G15, Maness Spring 2018 Miembro de Cal Poly, Team S25-G15, Maness Spring 2018

CPSU-MANESS-S18S25G15

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 9

Todo El Tiempo: 879