Repara tus cosas Comunidad Tienda

Cineyo BT-03 Device Page Button Replacement

Introducción

This guide will take you step by step through the steps of replacing your devices buttons.

Qué necesitas

  1. Cineyo BT-03 Device Page Button Replacement, Cineyo BT-03 Device Disassembly: paso 1, imagen 1 de 3 Cineyo BT-03 Device Page Button Replacement, Cineyo BT-03 Device Disassembly: paso 1, imagen 2 de 3 Cineyo BT-03 Device Page Button Replacement, Cineyo BT-03 Device Disassembly: paso 1, imagen 3 de 3

    • Remove the top (button side) rubber cover using your hands.

    Editar

  2. Cineyo BT-03 Device Page Button Replacement: paso 2, imagen 1 de 2 Cineyo BT-03 Device Page Button Replacement: paso 2, imagen 2 de 2

    • Flip over the device and remove the bottom rubber cover using your hands.

    Editar

  3. Cineyo BT-03 Device Page Button Replacement: paso 3, imagen 1 de 3 Cineyo BT-03 Device Page Button Replacement: paso 3, imagen 2 de 3 Cineyo BT-03 Device Page Button Replacement: paso 3, imagen 3 de 3

    • Using your hands, pull off the plastic side cover (on the side with the audio jack) using the indented tab. The indented tab has been highlighted in the picture.

    Editar

  5. Cineyo BT-03 Device Page Button Replacement: paso 4, imagen 1 de 3 Cineyo BT-03 Device Page Button Replacement: paso 4, imagen 2 de 3 Cineyo BT-03 Device Page Button Replacement: paso 4, imagen 3 de 3

    • Detach the plastic speaker cover on both the front and back sides. Then slide the cover off of the device.

    • The cover should remain as one solid piece.

    Editar

  6. Cineyo BT-03 Device Page Button Replacement: paso 5, imagen 1 de 1

    • Remove the five 1 cm screws on the back side (opposite of the speakers) of the device using a Phillips #1 screwdriver.

    Editar

  7. Cineyo BT-03 Device Page Button Replacement: paso 6, imagen 1 de 1

    • Gently pull apart the two sections of the device.

    Editar

  8. Cineyo BT-03 Device Page Button Replacement, Button: paso 7, imagen 1 de 2 Cineyo BT-03 Device Page Button Replacement, Button: paso 7, imagen 2 de 2

    • With a Phillips #1 screwdriver, remove the two 5mm screws which attach the button mount to the plastic casing of the device.

    Editar

  9. Cineyo BT-03 Device Page Button Replacement: paso 8, imagen 1 de 2 Cineyo BT-03 Device Page Button Replacement: paso 8, imagen 2 de 2

    • Using a plastic opening tool, pry the button mount off of the plastic casing of the device.

    Editar

  10. Cineyo BT-03 Device Page Button Replacement: paso 9, imagen 1 de 2 Cineyo BT-03 Device Page Button Replacement: paso 9, imagen 2 de 2

    • Using a soldering iron and iFixit’s Soldering Guide, remove the individual buttons.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Rene Klopf

Miembro Desde 01/30/17

463 Reputación

4 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

Baylor, Team 8-3, Whitney Spring 2017 Miembro de Baylor, Team 8-3, Whitney Spring 2017

BU-WHITNEY-S17S8G3

5 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 6

Todo El Tiempo: 114