Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

You will need to replace the motherboard of the computer if it is unresponsive.

  1. Remove the 18 Phillips screws using a screwdriver with a PH0 bit. Remove the 18 Phillips screws using a screwdriver with a PH0 bit.
    • Remove the 18 Phillips screws using a screwdriver with a PH0 bit.

  2. Using a spudger, gently pry open the back from the top. Using a spudger, gently pry open the back from the top.
    • Using a spudger, gently pry open the back from the top.

  3. Once it is opened up, locate the battery and the cable that is attached to it.
    • Once it is opened up, locate the battery and the cable that is attached to it.

  4. Next,  unscrew the battery pack. The one screw should be located on the far right of it. This will ensure that the battery comes out easily and affectively. Next,  unscrew the battery pack. The one screw should be located on the far right of it. This will ensure that the battery comes out easily and affectively.
    • Next, unscrew the battery pack. The one screw should be located on the far right of it. This will ensure that the battery comes out easily and affectively.

  5. Kit de Destornilladores Manta

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de Destornilladores Manta

    Upgrade Your Toolbox
  6. Take the battery out easily for replacement.
    • Take the battery out easily for replacement.

  7. Remove the two antenna cables that attach the wireless card to the motherboard. One will be black and the other will be white.
    • Remove the two antenna cables that attach the wireless card to the motherboard. One will be black and the other will be white.

  8. Locate the screw that holds the wireless card in place and then remove it using a screwdriver with a PH0 bit. Locate the screw that holds the wireless card in place and then remove it using a screwdriver with a PH0 bit.
    • Locate the screw that holds the wireless card in place and then remove it using a screwdriver with a PH0 bit.

  9. Slide the Wireless card out gently with two fingers while being careful not to damage any surrounding parts.
    • Slide the Wireless card out gently with two fingers while being careful not to damage any surrounding parts.

  10. Remove the four Phillips screws. Remove the four Phillips screws.
    • Remove the four Phillips screws.

  11. Remove tape that secures the ribbon cables. Using the spudger, lift the latches to unlock each ribbon cable. Remove the cables.
    • Remove tape that secures the ribbon cables.

    • Using the spudger, lift the latches to unlock each ribbon cable.

    • Remove the cables.

  12. Remove the large black cable between the two ribbon cables.
    • Remove the large black cable between the two ribbon cables.

  13. Remove the remaining cable.
    • Remove the remaining cable.

    • Remove the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

RAM?

SSD?

Upgradable?

Removable?

www - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 26

Todo El Tiempo: 1,161