Repara tus cosas Comunidad Tienda

Ceiling Fan Pull Chain Switch Replacement

Introducción

This guide will show you how to replace a ceiling fan pull chain switch.

Ceiling fan pull chains can break in two different ways:

  1. Chain breaks somewhere in the middle, outside the fan housing
    • In this case, the chain can be fixed by adding an extension chain.
  2. Chain breaks inside the fan housing
    • The chain will not be visible from the outside, so the fan housing must be opened to replace the chain or the pull chain switch itself.

This is a guide for replacing the pull chain switch.

Warning: Following this guide may expose you to voltage. Turn off the power from the circuit breaker and turn off any light switches that provide power to the ceiling fan to prevent injury.

Qué necesitas

  1. Ceiling Fan Pull Chain Switch Replacement, Pull Chain Switch: paso 1, imagen 1 de 2 Ceiling Fan Pull Chain Switch Replacement, Pull Chain Switch: paso 1, imagen 2 de 2

    • Caution: Turn off the power from the circuit breaker and turn off any light switches that provide power to the ceiling fan.

    • Remove the white cover by unscrewing the nut on the bottom from where the chain is hanging.

    Editar

  2. Ceiling Fan Pull Chain Switch Replacement: paso 2, imagen 1 de 3 Ceiling Fan Pull Chain Switch Replacement: paso 2, imagen 2 de 3 Ceiling Fan Pull Chain Switch Replacement: paso 2, imagen 3 de 3

    • Caution: Let the bulbs cool off before you remove them.

    • Remove the bulbs from their sockets.

    Editar

  3. Ceiling Fan Pull Chain Switch Replacement: paso 3, imagen 1 de 2 Ceiling Fan Pull Chain Switch Replacement: paso 3, imagen 2 de 2

    • Remove the screws around the base.

    • Remove the fan housing.

    Editar

  4. Ceiling Fan Pull Chain Switch Replacement: paso 4, imagen 1 de 1

    • Pull the switch out of the fan housing, leaving the wires attached.

    Editar

  6. Ceiling Fan Pull Chain Switch Replacement: paso 5, imagen 1 de 3 Ceiling Fan Pull Chain Switch Replacement: paso 5, imagen 2 de 3 Ceiling Fan Pull Chain Switch Replacement: paso 5, imagen 3 de 3

    • Cut the colored wires from the switch using a pair of wire cutters.

    • On some switch models, the wires can be detached by pulling.

    Editar

  7. Ceiling Fan Pull Chain Switch Replacement: paso 6, imagen 1 de 3 Ceiling Fan Pull Chain Switch Replacement: paso 6, imagen 2 de 3 Ceiling Fan Pull Chain Switch Replacement: paso 6, imagen 3 de 3

    • Note the wire colors and the terminal they attach to on the old switch.

    • 1 - Red

    • 2 - Purple

    • 3 - Yellow

    • L - Black

    Editar

  8. Ceiling Fan Pull Chain Switch Replacement: paso 7, imagen 1 de 1

    • Attach the colored wires to the new switch's respective terminals.

    Editar

  9. Ceiling Fan Pull Chain Switch Replacement: paso 8, imagen 1 de 2 Ceiling Fan Pull Chain Switch Replacement: paso 8, imagen 2 de 2

    • Put back the switch in the hole in the fan housing from the inside.

    • Tighten up the screws on the outside.

    Editar

  10. Ceiling Fan Pull Chain Switch Replacement: paso 9, imagen 1 de 3 Ceiling Fan Pull Chain Switch Replacement: paso 9, imagen 2 de 3 Ceiling Fan Pull Chain Switch Replacement: paso 9, imagen 3 de 3

    • Put back the white cover and then tighten up the nut at the bottom of the cover from where the chain is hanging.

    Editar

  11. Ceiling Fan Pull Chain Switch Replacement: paso 10, imagen 1 de 2 Ceiling Fan Pull Chain Switch Replacement: paso 10, imagen 2 de 2

    • Turn the power back on and test the switch to find if it is working or not.

    Editar
Linea de Meta

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 14

Ultimos 7 días: 107

Ultimos 30 días: 309

Todo El Tiempo: 10,863