Saltar al contenido principal

Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement

Qué necesitas

  1. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement, Battery: paso 1, imagen 1 de 1
    • Slide the slider on the back of the phone to the free position.

  2. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: paso 2, imagen 1 de 1
    • Using a plastic opening tool, gently lift open the back panel from bottom of the panel.

  3. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: paso 3, imagen 1 de 2 Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: paso 3, imagen 2 de 2
    • Pull the white battery tab upwards and remove the battery.

  4. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement, Motherboard: paso 4, imagen 1 de 1
    • Remove the four 6mm Y0 screws from the corners of the device.

  5. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: paso 5, imagen 1 de 1
    • Remove the four 5mm Y0 screws from the back of the device.

  6. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: paso 6, imagen 1 de 1
    • Using a spudger, pry away the motherboard from its compartment, by inserting the spudger in the compartment and lifting upwards until fully out.

  7. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: paso 7, imagen 1 de 1
    • Lastly, using your hands, separate the motherboard from its compartment.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Zack Almeida

Miembro Desde 10/24/18

392 Reputación

4 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 2

Todo El Tiempo: 171