Repara tus cosas Comunidad Tienda

Casio CTK-501 Speaker Replacement

Qué necesitas

  1. Casio CTK-501 Speaker Replacement, Bottom Panel: paso 1, imagen 1 de 2 Casio CTK-501 Speaker Replacement, Bottom Panel: paso 1, imagen 2 de 2

    • Flip the keyboard over so that the bottom is facing up.

    • Remove the twenty-seven 12 mm screws from the dark-grey panel using a Phillips #2 screwdriver.

    Editar

  2. Casio CTK-501 Speaker Replacement: paso 2, imagen 1 de 1

    • Remove the bottom panel by lifting and pulling it towards yourself.

    Editar

  3. Casio CTK-501 Speaker Replacement: paso 3, imagen 1 de 2 Casio CTK-501 Speaker Replacement: paso 3, imagen 2 de 2

    • Flip open the top half of the keyboard.

    • Set the keyboard onto the bottom half with the internal parts facing up.

    • Be careful not to let the bottom drop.

    Editar

  5. Casio CTK-501 Speaker Replacement, Speaker: paso 4, imagen 1 de 1

    • Plug in the soldering iron and place somewhere safe to avoid burning yourself or causing a fire.

    • Completely unscrew and remove all four screws in the corners of the speaker.

    Editar

  6. Casio CTK-501 Speaker Replacement: paso 5, imagen 1 de 1

    • Pull the speaker out of the keyboard and set on a flat surface to solder safely.

    Editar

  7. Casio CTK-501 Speaker Replacement: paso 6, imagen 1 de 1

    • Be careful when removing the wires and avoid dripping solder on yourself or the keyboard.

    • Touch soldering iron to solder over the end of the wires, and when the solder melts, pull the wires away from the speaker.

    • Remove the speaker and replace with a new one.

    Editar

  8. Casio CTK-501 Speaker Replacement: paso 7, imagen 1 de 1

    • Strip the wires if you need more clean metal to solder to the speaker.

    • Use the soldering iron to melt the solder over the wire to connect them to the speaker.

    Editar

  9. Casio CTK-501 Speaker Replacement: paso 8, imagen 1 de 1

    • Completely screw in the screws back into the original positions on the corner of the speaker.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Jimmy Winne

Miembro Desde 10/04/12

578 Reputación

6 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

Cal Poly, Team 9-16, Amido Fall 2012 Miembro de Cal Poly, Team 9-16, Amido Fall 2012

CPSU-AMIDO-F12S9G16

Miembros de 4

6 Guías creadas

1Guía Comentario

I have a Casio ctk 691 Keyboard and it’s not Turning up is working is coming on but my volume slider is not working

Jacameron Bussey - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 21

Todo El Tiempo: 6,645